• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Repairs

Window repairs can help homeowners save money and maintain their comfort. Window replacement is often required in the event of severe damage, such as broken glass or a shattered window frame.

But there are many other issues that can be addressed to extend the lifespan of your windows. Common issues include:

Cracked or broken panes

Whether it's an errant rock that was tossed by your lawnmowers or a tree branch that has been blown by strong winds, cracked window glass isn't just ugly, but it can also result in higher electric bills since the broken pieces allow cold air to enter your home. It's relatively easy to repair windows that have broken panes.

Start by carefully removing glass with gloves and safety sunglasses. You may have use a utility knife to remove old glazing compound or putty around the frame's edges. Then, clean the glass's surface and the frame's wood using a soft cloth or paper towel.

Once the area is clean, apply a waterproof silicone caulking around the perimeter of the frame. This will prevent water from getting into the frame through the cracks and causing further damage.

A serious crack in double glazed window repairs near me-paned glass can compromise the gas between the panes, which can make your windows less efficient in insulating. If the crack is serious enough to threaten the integrity of the glass or if you have an inner pane that's totally missing, it might be the time to call an expert.

Thermal stress cracks may also occur when there's a drastic difference in temperature inside and outside your home. The glass is then able to expand and Window repairs shrink. If this happens to two parts of a window it's best to simply replace the pane rather than trying to repair it.

Clear tape can be used to seal cracks in windows that aren't yet ready for replacement. It also keeps out bugs and cold wind. You can also cut a nylon stocking large enough to cover the entire crack, and then attach it using duct tape. This is not an end-to-end solution, but it can keep insects and cold air away from your home. If you notice cracks or blemishes on your windows that are older, you should check with your local business to determine whether replacing the entire window is a better solution.

Rotten Wood

Wood rot is one of the most common problems with windows. It can ruin a house's appearance and create a safety risk. It is possible to repair damaged wood. First, you need to make sure that the root of the rot has been addressed. This can be accomplished by looking for roof leaks or gutters that are not functioning cracking caulking, and any other areas that allow water to get into the wood.

The next step is to remove any rotten areas of the window frame. This can be done using the use of a chisel, rasp or claw hammer. Once the rotten areas have been removed, you will need to replace them with fresh wood. Pre-treated wood is suggested for this task, since it is resistant to decay. If you are not able to replace the damaged timber you can apply filler and wood hardener to repair the damaged area. This type of product will be available at most hardware stores. To get the best results, make sure you follow the instructions on the label.

After you have repaired the rotten areas of the windowsill, it is important to protect the repaired area. This can be done by applying a waterproof wood sealant. Sikkens, for example is a great one to apply.

Use a two-part epoxy to protect the wood against further damage. It is simple to apply and provides a good finish. It is crucial to follow the instructions on the label. Once the epoxy filler has dried you can sand the surface of the wooden. It is recommended to begin with a rough grade of sandpaper before moving to a smoother one.

You don't want to expose your damaged area to more moisture. It is therefore an ideal idea to cover the area that has been repaired with an oil-based primer which will help protect it from moisture. After that, you are able to apply the wood sealant, which is waterproof.

It won't open

A window that isn't opening can be the result of various reasons. The house could have settled or the wooden frames could have warped during humid weather. Someone might have also nailed them shut for security. With a little patience and the right tools you can open most stuck windows.

One of the main reasons for windows that isn't able to open is the accumulation of gunk or debris on its moving parts. Grime and dirt build up on sliding tracks, hinges and locks over time, notes Acme Glass. Additionally, hardware made of metal may get rusty when in contact with humidity or direct sunlight. Maintaining these areas lubricated by spray grease can prevent the oxidation process and ensure that your window is working well.

The pulleys used to raise or lower the window can be loosened, or break. These parts can lose tension and cause obstruction if they are located higher than two floors above surface.

If you have trouble opening a door, try using a pry-bar to gently open the door. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. Try using a hairdryer to dry the frame's edges for several minutes. This will warm the wood, making it easier to move.

A faulty spring can also be the reason for a window that won't lift or lower. Depending on the manufacturer of your windows, you will need to refer to the owner's manual for additional instructions.

If you've tried cleaning and lubricating the moving parts of your windows, but they cannot open, it's time to replace the windows. Homespire Windows & Doors provides energy-efficient replacement windows. Don't let your windows slip from functional to inoperable, window repairs as a window that isn't properly shut can expose your home to water damage and burglary. Contact us today for more information on our replacement windows as well as our services!